| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网：www.gchane.com |
产品介绍
opto22奥普图 G4ODC5R
opto22/奥普图 G4ODC5R
opto22奥普图
G4 Reed Relay Output, 5 VDC logic, normally open ; G4 I/O family The G4ODC5R is a reed relay, low-contact-resistance DC output. It is a single-pole, single-throw, normally open mechanical relay (Form A, SPST-NO). It was designed for a low-voltage DC load that is purely resistive (no inrush current). Typical applications for these modules include analog signal and communication line multiplexing. Because of their low 10 VA rating, these modules are not recommended for inductive or capacitive loads (even very small loads) because the inrush current is likely to exceed the 10 VA rating. IMPORTANT: Applications using 120 VAC are typically NOT suited to this module. If you are considering using this module for any application other than low-voltage purely resistive loads, see the detailed notes and rating curve in the data sheet, and call Pre-sales Engineering for specific guidance. If you need a Factory Mutual approved version of this module, see the G4ODC5RFM .
Units G4ODC5R G4ODC5RFM* G4ODC5R5 G4ODC5R5FM* Contact form Form A SPST mechanical relay Form B SPST mechanical relay NOTE: The application of the dry contact module must not exceed 10 VA under steady-state or momentary in-rush conditions. For voltages at or below 20 volts, the current limit is 0.5 amps. For voltages above 20 volts, the maximum allowable current is determined by the following equation: Maximum Current = 10 VA / Voltage Normal position Open Closed Contact rating VA 10 10 Maximum switching voltage (see Note) VDC 100 100 VAC 130 130 Maximum switching current A 0.5 (see Note) 0.5 (see Note) Contact resistance Milliohms 200 200 Turn-on time microseconds 500 500 Turn-off time microseconds 500 500 Contact bounce microseconds 250 250 Mechanical life cycles 5 million 5 million Logic voltage range VDC 4.8–6 4.8–6 Logic OFF voltage range VDC 0.0–0.8 0.0–0.8 Logic ON voltage range VDC 3.8–6 3.8–6 Indeterminate range VDC 0.8–3.8 0.8–3.8 Logic input current at nominal logic voltage milliamps 14 14 Isolation voltage (transient) input-to-output VDC 1,500 1,500 Ambient temperature: Operating Storage °C °C 0 to 70 -60 to +105 0 to 70 -60 to +105 *Part numbers ending in FM are Factory Mutual approved.
Opto 22 Home Products All Products Product Selector I/O Digital I/O G4 Single Channel Reed Relay
更多产品:
更多品牌:
