opto22奥普图 SNAP-ODC5R5FM-产品快照
- 品牌:
- opto22奥普图
- 型号:
- SNAP-ODC5R5FM
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网：www.gchane.com |
产品介绍
opto22奥普图 SNAP-ODC5R5FM
opto22/奥普图 SNAP-ODC5R5FM
opto22奥普图
SNAP 4-Ch Reed Relay Digital (Discrete) Output Module, Normally Closed, Factory Mutual Approved ; The SNAP-ODC5R5FM is a digital output module that uses reed relays and does not provide optical isolation. Current rating depends on the voltage the module is used with. This module is normally closed. It includes a connector clamp to prevent sparks and is Factory Mutual (FM) approved. Typical applications for these modules include analog signal and communication line multiplexing. Because of their low 10 VA rating, these modules are not recommended for inductive or capacitive loads (even very small loads) because the inrush current is likely to exceed the 10 VA rating. IMPORTANT: Applications using 120 VAC are typically NOT suited to this module. If you are considering using this module for any application other than low-voltage purely resistive loads, see the detailed notes and rating curve in the data sheet, and call Pre-sales Engineering for specific guidance. For many applications a better choice is the SNAP-OMR6-C module , which can handle a full 6 A at 0-250 VAC or 0-30 VDC. Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller . Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley MicroLogix or other RSLogix-based PLC system , such as ControlLogix or CompactLogix. If you do not need FM approval, see the SNAP-ODC5R5 . For easier, faster wiring, see SNAP TEX cables and breakout boards . Build your system in the SNAP I/O Configurator .
SNAP-ODC5RFM SNAP-ODC5R5FM Key Feature Factory Mutual approved Factory Mutual approved Torque, hold-down screws 4 in-lb (0.45 N-m) 4 in-lb (0.45 N-m) Torque, connector screws 5.26 in-lb (0.6 N-m) 5.26 in-lb (0.6 N-m) Field Side Ratings (each channel) Line Voltage - Range 0–100 VDC 0–130 VAC* 0–100 VDC 0–130 VAC* Line Voltage - Nominal -- -- Current Rating 0.5 amps switching* 0.5 amps switching* Surge Current 0.5 amps* 0.5 amps* Minimum Load 0 mA 0 mA Output Voltage Drop 0 volts 0 volts Off-state Leakage 0 mA 0 mA Peak Blocking Voltage 100 VDC / 130 VAC 100 VDC / 130 VAC Fuse (Common to all Channels) Has four isolated channels. User must provide own fusing. Has four isolated channels. User must provide own fusing. Logic Side Ratings Pickup Voltage 4 V @ 5.5 mA 4 V @ 5.5 mA Dropout Voltage 1 VDC 1 VDC Control Resistance 220 ohms 220 ohms Logic Supply Voltage 5 VDC ± 0.25 VDC 5 VDC ± 0.25 VDC Logic Supply Current 50 mA maximum 50 mA maximum Module Ratings Number of Channels Per Module 4 4 Turn-on Time 500 usec 500 usec Turn-off Time 500 usec 500 usec Isolation (Field Side to Logic Side) 1,500 volts (transient) 1,500 volts (transient) Mechanical Life 200,000,000 cycles 200,000,000 cycles Temperature -20 to 70 °C, operating -30 to 85 °C, storage -20 to 70 °C, operating -30 to 85 °C, storage Agency Approvals CE, FM, RoHS, DFARS CE, FM, RoHS, DFARS Warranty 30 months or mechanical life, whichever comes first 30 months or mechanical life, whichever comes first * The current of the dry contact module must not exceed 10 VA power rating under steady state or momentary in-rush conditions. For voltages at or below 20 volts, the current limit is 0.5 amps. For voltages above 20 volts, the maximum allowable current is determined by the following equation: Current Maximum = 10 VA / Voltage. Rating curve is in the data sheet.
Opto 22 Home Products IO4AB Product Selector I/O Digital I/O SNAP I/O Reed Relay
更多产品:
更多品牌:
