WEDI 185/215/15A O型圈-产品快照
- 品牌:
- 型号:
- WEDI 185/215/15A
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs10@gchane.com , QQ1653501665
|
产品介绍
WEDI 185/215/15A O型圈
Radial rotary shaft seals. NBR (72A), 185,0x215,0x15,0mm, A
Radial rotary shaft seals serve to seal rotating machine components. The mainly consist of a rubber part with a reinforcement plate and a worm spring made of spring steel. Depending on the intended use, there are three basic types: the standard construction forms A, B and C. Materials: NBR (72° Shore A) Temperature range: -30°C to max. +100°C Running speed: Max. 14 m/s Optional: FPM material (Viton) (-20°C to +200°C, running speed max. 37 m/s) -V Special requirements that need special models: •high housing roughness, •high housing thermal expansion, •resistant to pressure, •synthetic oils with special additives, •aggressive media Designs: A / AS: The rubber-elastic external jacket can bridge the gap between thermal expansion and a high degree of roughness in the housing hole. There is no frictional corrosion. Changing the seal frequently prevents damage to the housing hole. Is suited for sealing gaseous or low-viscosity media. The design AS is provided with additional dust lip to safeguard against dirt and corrosion. B / BS: Metallic housing, press in slightly during installation. Requires narrower tolerances of the housing hole, to ensure a seal even at the outer casing. BS design with an additional dust lip against dirt and risk of corrosion. Construction type C/ CS: Metallic housing with reinforcing cap. Sealing and assembly as design B. Used in preference in harsh operating conditions and for larger dimensions. Is less sensitive to assembly errors due to the reinforcing cap. CS design with additional dust lip against dirt and risk of corrosion. AD / BD: The designs AD or BD with two sealing lips are used to seal and separate two media. AO / BO: The designs AO and BO are designed without the garter springs. They are designed only for minor seal cases. All data are to be understood as non-binding reference values! We do not assume liability for any data selection not confirmed in writing. Unless otherwise specified, pressure values refer to liquids from Group II at +20°C.
Technical data Material NBR (72A) Design A Shaft Ø [mm] 185,0 External Ø [mm] 215,0 Width [mm] 15,0 Note RoHs-compliant Further information GTIN 4050571752064 Customs duty number: 84842000
general industrial hardware & accesories O-rings - Rotary shaft seals Radial rotary shaft seal > 80 mm, DIN 3760 WEDI 185/215/15A
更多产品:
更多品牌:
