KBDF-24P 电机控制-产品快照
- 品牌:
- KBDF-24P
- 型号:
- KBDF-24P
- 重量:
- 1.2712 kg
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 暂无展示，可咨询在线客服 | 400-811-6961 |
 微信咨询，cs11@gchane.com , QQ1429311537
|
产品介绍
KBDF-24P 电机控制
1HP KBDF-24P IP-20 VFD 230VAC 3PH INPUT KB 9695
KBDF-24P
KB 9695 Model Number: KBDF-24P Description: 1HP,230VAC,3PH INPUT, IP-20,CASE A Output: 4.0 Amps, 230VAC, 3PH Ship Weight: 2.8 lbs.
KBDF Sensorless Flux Vector Compensation with Static-Auto-Tune to provide excellent speed regulation with high torque loads throughout the entire speed range. Auto energy saving at light loads. Smooth motor torque. They are designed for applications that may or may not require digital programming and a digital display. Hybrid Digital KBDF AC Drive provides variable speed control of standard 3 phase AC induction motors from 1/8 to 5 horsepower with 200% Starting Torque and Digital Display with LED Status Indicators Easy to Install and Simple to Operate With CSP™ you are up and running in less than 10 minutes. Motors Last Longer Proprietary CL Software Provides overload protection, prevents motor burnout and eliminates nuisance tripping. UL approved as electronic overload protector for motors. Energy Saving Uses only the power the application requires Energy savings is realized by using variable motor speed vs. constant speed motors. Economical to Use No need to derate drive for high starting torque applications. Combines Soft Start with Variable Speed Control (Adjustable Soft Start) Sensorless Flux Vector Control Provides excellent speed regulation with high torque loads throughout the entire speed range. Auto-energy saving at light loads. Smooth motor torque. Local/Remote Operation When used with process control, the Local/Remote key can be used to switch from process control to manual control if a process fault occurs. Electronic Inrush Current Limit (EICL™) Protection Eliminates harmful inrush AC line current during power up. Inputs/Outputs Seven Isolated multi-function inputs with sink or source mode control logic, two analog inputs, two multi-function output relays and one analog output. Built-in Potentiometer Quickest way to change motor speed. Ride-Through Provides smooth recovery to the previous set speed during a momentary power loss. Holding Torque at Zero Speed Resists motor shaft rotation when the drive is in “Stop” mode. Regeneration Eliminates tripping due to high bus voltage caused by rapid deceleration of high inertial loads. Undervoltage and Overvoltage Protection Shuts down the drive if the AC line input voltage goes above or below the operating range. Short Circuit Protection Shuts down the drive if a short circuit occurs at the motor (phase-to-phase). Memory Module: P/N 9634 , The optional plug-in memory module can store up to 4 programs for cloning and archiving. This is in addition to the (4) on-board programs. IODF Input/Output Multi-Function Expansion Module P/N: 9646 , Provides additional input/output and Multi-Function Relay. Increases the functionality of the standard input/output of the drive. DIDF RS-232 and RS-485 Modbus RTU Communication Module P/N: 9647 , Allows direct communication between the drive and Modbus RTU protocol. Uses RS-232 and RS-485 Modbus RTU Communication Module. (Required for Drive-Link™.) Drive-Link™ Programming Kit P/N: Available Soon! , PC Windows® based programming software. Includes DIDF Modbus Communication Module Dynamic Brake Module P/N: 9598 , Provides dynamic braking of the motor. Externally mounted. Case "B" drives only. Class “A” (CE) RFI Filter* Installs inside the drive (factory Installed) *Order “F” suffix for built in filter. KBDF-**F.
Motor Controls
更多产品:
更多品牌:
