Char-Lynn (Eaton) 119-2020-001-产品快照
- 品牌:
- Char-lynn
- 型号:
- Char-Lynn (Eaton) 119-2020-001
* 所有产品信息均源于第三方公开数据或用户上传，工业链仅整合供参考，真实价格货期请联系供应商确认.
| 供应商名称 | 电话 | 备注 |
|---|---|---|
| 伊顿（中国）投资有限公司 | 021-52000099 |
产品介绍
Char-Lynn (Eaton) 119-2020-001
Char-Lynn (Eaton) 119-2020-001
Char-Lynn (Eaton) 119-2020-001
119-2020-001 Hydraulic Geroler Disc Valve Motor 28.71 Cm³/r Displacement, 45 Gpm Max. Flow Rate 400 Rpm Max.
Product Features & Specifications Series: 10,000 Series - Standard Motor - 2 Speed - 119-xxxx Max Geometric Displacement: 57.41 Cu. In./ Rev Maximum Operating Pressure: 2750 psi Continuous Torque: 10400 In·lb Maximum RPM: 400 Rpm Maximum Operating Temperature: 82ºc or 180ºf Mounting Flange Type: 4-bolt Flange - Non Sae Rated - With 5 In. Pilot Dia. Port Size: Sae 1-5/16-12 Un-2b " Shaft Type: Keyed Output Shaft Size: 2-1/4 In. Tapered Threaded Shaft Maximum Flow Rate: 45 Gpm Operation Mode: Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every Minute / Peak Operation - 1 Percent Of Every Minute Drain Connection Size: .750-16 Unf-2b O-ring Port Size -8 Operation Rating Description: Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every Minute / Peak Operation - 1 Percent Of Every Minute Port Orientation: Staggered Ports Replacement Balance Ring-Sold Separately: 001 Design - 21561-000 - 1 Required Replacement Bearing Spacer-Sold Separately: 001 Design - 6181-000 - 1 Required Replacement Buna Seal Kit-Sold Separately: 001 Design - Motor Seal Kit 62508-000, Shaft Seal Kit 6406-000 - 1 Each Required Replacement Drive-Sold Separately: 001 Design - 6167-000 - 1 Required Replacement Drive Valve-Sold Separately: 001 Design 6168-000 - 1 Required Replacement Geroler-Sold Separately: 001 Design - 8573-004 - 1 Required Replacement Housing,Bearing Side (Front) - Sold Separately: 001 Design - 15045-000 - 1 Required Replacement Long Cap Screw (Cap End) - Sold Seprately: 001 Design -14410-009 - 2 Required Replacement Output Shaft- Sold Separately: 001 Design - 8483-000 - 1 Required Replacement Plate Valve-Sold Separately: 001 Design 8957-000 - 1 Required Replacement Radial Bearing-Sold Separately: 001 Design - 9003-002 - 2 Required Replacement Rear Housing-Sold Separately: 001 Design - 21815-000 - 1 Required Replacement Short Cap Screw (Mounting End)-Sold Separately: 001 Design -14410-006 - 2 Required Replacement Valve-Sold Separately: 001 Design 201007-001 - 1 Required Replacement Wear Place-Sold Separately: 001 Design 8958-000 - 1 Required
119-2020-001
更多产品:
更多品牌:
