Char-Lynn (Eaton) 104-1247-006-产品快照
- 品牌:
- Char-lynn
- 型号:
- Char-Lynn (Eaton) 104-1247-006
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
伊顿(中国)投资有限公司 | 021-52000099 |
产品介绍
Char-Lynn (Eaton) 104-1247-006
Char-Lynn (Eaton) 104-1247-006
Char-Lynn (Eaton) 104-1247-006
104-1247-006 Hydraulic Geroler Disc Valve Motor 6.2 Cm³/r Displacement, 20 Gpm Max. Flow Rate 742 Rpm Max.
Product Features & Specifications Series: 2,000 Series - Standard Motor - 104-xxxx Max Geometric Displacement: 6.20 Cu. In./ Rev Maximum Operating Pressure: 3000 psi Continuous Torque: 2630 In·lb Maximum RPM: 742 Rpm Maximum Operating Temperature: 82ºc or 180ºf Mounting Flange Type: 4-bolt Flange - Non Sae Rated - With 3-1/4 In. Pilot Dia. Port Size: Sae-10 7/8-14 Unf-2b " Shaft Type: Keyed Output Shaft Size: 1-1/4 In. Straight With Straight Key Maximum Flow Rate: 20 Gpm Operation Mode: Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every Minute / Peak Operation - 1 Percent Of Every Minute Drain Connection Size: .4375-20 Unf-2b O-ring Port Size -4 Operation Rating Description: Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every Minute / Peak Operation - 1 Percent Of Every Minute Port Orientation: Staggered Ports Replacement Balance Ring-Sold Separately: 006 Design - 8915-000 - 1 Required Replacement Buna Seal Kit-Sold Separately: 006 Design - 61258-000 - 1 Required Replacement Drive-Sold Separately: 006 Design - 21371-010 - 1 Required Replacement Drive Valve-Sold Separately: 006 Design - 8433-000 - 1 Required Replacement Geroler-Sold Separately: 006 Design - 21625-002 - 1 Required Replacement Housing,Bearing Side (Front) - Sold Separately: 006 Design - 21578-005 - 1 Required Replacement Long Cap Screw (Cap End) - Sold Seprately: 006 Design - 14384-006 - 4 Required Replacement Output Shaft and Bearing Kit-Sold Separately: 006 Design - 21618-002 - 1 Required Replacement Pin For Balance Ring-Sold Separately: 006 Design - 14351-000 - 2 Required Replacement Plate Valve-Sold Separately: 006 Design - 22134-000 - 1 Required Replacement Rear Housing-Sold Separately: 006 Design - 21564-001 - 1 Required Replacement Valve-Sold Separately: 006 Design - 21466-000 - 1 Required Replacement Viton Seal Kit- Sold Separately: 006 Design - 61263-000 - 1 Required Replacement Wear Place-Sold Separately: 006 Design - 22102-000 - 1 Required Replacement Pin for Balancing Ring - Sold Separately: 006 Design - 14351-000 - 2 Required
104-1247-006