Leeson利森 M1125268.00 电机-产品快照
- 品牌:
- Leeson
- 型号:
- M1125268.00
* 所有产品信息均源于第三方公开数据或用户上传,工业链仅整合供参考,真实价格货期请联系供应商确认.
供应商名称 | 电话 | 备注 |
---|---|---|
深圳市格雷创科技有限公司 | 400-811-6961 | 微信及邮件咨询,官网:www.gchane.com |
产品介绍
Leeson利森 M1125268.00 电机
1/8HP LEESON 14RPM 90VDC EPOXY WASHGUARD GEARMOTOR M1125268
M1125268.00
Leeson Gearbox output shafts are coated with Mirolon 3300 fortified Teflon for superior corrosion resistance. Frame, endshields, armature and interior components protected by enamel and polyester compounds for resistance to moisture, acids, alkalies, and oil. Cast conduit box with threaded conduit holes and Nitrile gaskets keep water out. The conduit box cover is made from 304 stainless steel. For any condensation that may accumulate inside the motor, a one-way stainless steel vapor vent is provided. All hardware is stainless steel. Motor painted with white epoxy for superior corrosion resistance and protection. Machined fits between the endbells and motor frame are sealed with gaskets. Thru-bolt heads and nuts sealed with fiber washers. O-rings under each threaded brush cover. Precision machined in-line steel gears, with a first stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needled bearings for high loaded capacities. LEESON WASHGUARD motors are designed for extended life in applications requiring regular, washdown, or otherwise wet environments. Washguard motors retard the entrance of water. Extra protection for the motor’s interior prevents rust and corrosion build-up and releases trapped moisture to ensure a longer life than possible with a standard motor. These gearmotors are designed for mounting at any angle, but shaft up with motor below should be avoided to prevent leakage of lubricant into the motor should the shaft shield fail. Overhung load capacities shown at the center of the output shaft. The motor’s stall torque exceeds recommended full load torques for the gearboxes. A current limiting device should be used to prevent damage to the gear sets. RPM 14 Volts 90 Volts HPKW 1/8 F.L. Amps 1.5 F.L. Amps Frame 31 S. F Amps S. F Amps Max Amb 40 Hertz Phase Insul Class F3 Duty CONT TYPE DN Model # CM31D25VZ1 Serv. Factor 1.0 PF Eff 100% Eff 75% Enclosure TENV Protection NOT Therm.Prot. Bearing OPE 6201-13 Design Code Bearing PE 6201-13 UL Yes CSA Yes CE Yes Torque lb-In 341 Nameplate M100414702 Lubrication POLYREX EM Series PE350 Overrlung Ld. 465 Shaft Type PARALLEL
Electric Motors